View Single Post
  #63  
Old 22 January 2014, 06:47 PM
jimmy101_again jimmy101_again is offline
 
Join Date: 29 December 2005
Location: Greenwood, IN
Posts: 6,912
Default

Quote:
Originally Posted by BoKu View Post
I've actually filled a small tire straight from a 2000 PSI bottle. I couldn't hold the air chuck on the valve stem above about 100 PSI.
I'm a bit surprised, there should have only been a few pounds of force even at 100 PSI.

I wonder what the pop-off pressure is for locking or screw-on fixtures like this

Edit: I've never had any problem attaching quick connects on pressurized hoses at typical shop pressure of say 120 PSIG.
Reply With Quote